1.8KW AR-HK-H SERIES CHARGER  |產品中心|DC/DC OBC 多合一充電器

1.8KW AR-HK-H SERIES CHARGER


Model No.:1.8KW AR-HK-H SERIES CHARGER

Power:1.8KW

Input Voltage:AC270±5V

Output Voltage:16-68VDC/25-99VDC/34-132VDC/

Output Current:25A/16A

代碼 AR1K8-HK-H-H





Download: 1.8KW AR-HK-H SERIES CHARGER

 
Hardware Output Voltage Range Max Output Current Lead Acid Battery Charger Model Lithium Battery Charger Model
48V25A 18-68VDC 25A AR-HK-H-48-25 AR-HK-H-H66-25
72V25A 25-99VDC 25A AR-HK-H-72-25 ARHK-H-H99-25
96V16A 34-132VDC 16A AR-HK-H-96-18 AR-HK-H-H132-16
                                                
Features
 
Input Frequency 45-65Hz
Stand-by Consumption ≤5W
Main Output Output Mode CV / CC
Output Power 1800W@220VAC 700W@110VAC
CV Accuracy ±1%
CC Accuracy ±2%
Ripple Voltage Coefficient 5%
Communication Function CAN Communication Yes
Baud Rate 125Kbps、250Kbps、500Kbps
Terminal Resistance N/A
12V Output Load Capacity of 200 mA, Output controllable

 12V5A (Optional Output Function)
 
Low Voltage Output Output Mode Constant Voltage
Output Voltage
Rated Current
13.8V
5A
CV Accuracy ±2%
Maximum Current 5.5A±0.5A
Output Power ≥62.5W
Ripple Voltage Coefficient 1%

Protection function
 

Input Over-voltage Protection

AC270±5V

Input Under-voltage Protection

AC85±5V

Output Over-voltage Protection

Stop the output when exceeds + 1% of the maximum output voltage

Output Under-voltage Protection

Stop the output when below -5% of the minimum output voltage

Output Over-current Protection

Stop the output when exceeds + 1% of the maximum output current

Over-temperature Protection

Power down from 85 ℃ and turn off at 90℃

Short-circuit Protection

Stop Output

Battery Reverse Connect Protection

Fuse Burn-out

Ground Protection

≤100mΩ

CAN communication Protection

Automatically stop the output when CAN communication fails

Power-off Protection

Yes


Safety and others
 

Withstand Voltage

Input to Output:2000VAC≤10mA

Input to Ground:2000VAC≤12mA

Output to Ground:2000VAC≤10mA,all 1min

Insulation Resistance

Input, output, signal terminal to casing≥10MΩ

Testing Voltage 1000VDC

Electromagnetic Immunity

GB/T 18487.3-2001   11.3.1

Electromagnetic Abusive

GB/T 18487.3-2001   11.3.2

Harmonic Current

GB  17625.1-2003   6.7.1.1

Inrush Starting Current

≤24A

 Current-rise Time

≤5S,Overshoot≤5%

Close Response time

100%到10%≤50mS,100%到0%≤200mS

Protection Level

IP67

Vibration Resistance

10-25Hz Amplitude1.2mm,25-500Hz 30m/s2,8hrs per direction

Noise

≤60dB(A Level)

MTBF

150000H

Work Environment

Relative Temp 5%-95% No condensation

Working Temperature

-35℃ ~ +85℃

Storage Temperature

 -55℃ ~ +100℃


Installation size



 Interface Definitions

Notice: 1. The function on the signal connector are optional. It’s not all available in the charger. e.g.CAN BUS control and Enable control cannot be existed at same time.

      2. Pls pay attention to the position of function on the connector, don’t pay attention to the numbers on the connector.[Enable wiring pin is at opposite of LED. CAN Wiring pins is close to LED.]



 

商品己加入購物車

Faded Short Sleeve T-shirts

1.8KW AR-HK-H SERIES CHARGER

Model No.:1.8KW AR-HK-H SERIES CHARGER

Power:1.8KW

Input Voltage:AC270±5V

Output Voltage:16-68VDC/25-99VDC/34-132VDC/

Output Current:25A/16A